Live WebinarResuming Dentistry in the Post-Pandemic Era
13 Aug 2020, 08:00 PM EST (New York)
Eve Cuny Associate Professor
Tetric CAD is an esthetic composite block designed for the efficient production of single-unit restorations. Due to the pronounced chameleon effect of the material, restorations made of Tetric CAD optically blend into the existing tooth structure to generate a natural esthetic integration. The block is easy to use and efficient to process: restorations can be milled and polished quickly and then seated using an adhesive technique. The new composite blocks are available in an MT and HT level of translucency, in five and four shades respectively and in sizes I12 and C14.
Zirconium oxide for thin wall thicknesses
IPS e.max ZirCAD LT (low translucency) is a monolithic zirconium oxide block designed for crowns and 3-unit bridges. The material allows posterior crowns to be designed in a reduced wall thickness of 0.6 mm and anterior crowns in a reduced thickness of 0.4 mm due to its high mechanical strength of 1,200 MPa(a) and high fracture toughness of 5.1 MPa1/2(b). The reduced thicknesses increase the translucency of the restorations and benefit the esthetic outcome. A fluorescent effect can be achieved with IPS e.max CAD Crystall./Glaze Fluo. The restorations are placed using either a conventional cementation technique or a self-adhesive resin cement, such as SpeedCEM Plus. Sintering is carried out in the Programat CS4 furnace. The LT blocks are available in the shades BL, A1-3, B1-2 as well as in C2 and D2.
Extended range of shades for Telio CAD
Shades B3, C2 and D2 have been added to the range of Telio CAD blocks for PlanMill. As a result, the cross-linked PMMA blocks are now available in nine LT shades (BL3, A1, A2, A3, A3.5, B1, in addition to the three new shades) and in two different block sizes (B40L and B55).
All you need for restorations in a single visit
Ivoclar Vivadent offers a treatment concept that empowers practitioners to restore the dentition of their patients in a single visit. In addition to the blocks and cementation materials, the range includes coordinated materials for the entire restorative workflow starting from the OptraGate lip and cheek retractor to luting materials and oral care products.
IPS e.max, Tetric, Telio, Programat, SpeedCEM and OptraGate are registered trademarks of Ivoclar Vivadent AG.
a) typical mean value of flexural strength, R&D Ivoclar Vivadent AG, Schaan/Liechtenstein
b) R&D Ivoclar Vivadent AG, Schaan/Liechtenstein