Dubai, UAE: The CAD/CAM & Digital Dentistry industry has been on the rise in interest of CAD/CAM solutions by dental professionals – who have found that the best way towards the future of dentistry is with both accuracy and efficiency.
Over the years, CAD/CAM Conferences have had the privilege to be part of the platform of the steadily growing popularity and evolution of Middle Eastern Dentistry. This was, once again, the case at the 8th Edition of CAD/CAM and Digital Dentistry International Conference.
Following the outspoken success of seven conferences before, hosted in both the Middle East and the Asia Pacific, the 8th CAD/CAM and Digital Dentistry International Conference, held last 02-03 May 2013, at the JW Marriot Marquis Hotel in Dubai, UAE – was met with the familiar reaction of widely resounding applause and positivity as one of the regions premier conferences in Digital Dentistry.
Organized by Centre for Advanced Professional Practices (CAPP) together with the Emirates Dental Society (EDS), the Scientific Session featured 13 speakers from 9 countries as well as the return of the highly successful Dental Technicians Parallel Session with 5 speakers providing hours of educational learning experiences that left everyone with a truly memorable experience.
With a total of 37 companies present and over 65 brands being represented, the event continued to see the sponsorship from 9 of the major industry players: Sirona, Ivoclar Vivavent, 3M ESPE, Degudent/Dentsply, GlaxoSmithKline, Amann Girrbach, VITA, Phibo and MPC.
Scientific Program – 1,000 delegates from over 30 countries
Amongst the Key Opinion Leaders were Dr. Mark Morin, USA; Dr. Eduardo Mahn, Chile; Dr. Gary Severance, USA; Dr. Karsten Kamm & Joachim Meier, Germany; Dr. Ziad Salameh, Lebanon; Aiham Farah, Syria; Tobias Spech, Liechtenstein; Dr. Nicolas Boutin & Dr. Bernard Cannas, France; Dr. Philippe Tardieu; Dr. Francisco Barbosa, Spain; Dr. Hatem El-Damanhoury, Egypt and Dr. Khaled Abouseada, Egypt. The Dental Technicians session featured Ralph Oppacher, Germany; Michel Divet, France; Rik Jacobs, The Netherlands, Abdo Salem, CDT, Lebanon; Lutz Ketelaar and Yemen Chaban, Germany. The Scientific Session was accredited by the American Dental Association through CAPP as a recognized provider of Continuing Education accepted by Saudi Commission For Health Specialist, Health Authority Abu Dhabi, Ministry of Health and Dubai Health Authority.
A total of 1,000 delegates from over 30 countries, whether General Practicioners, Implantologists, Periodontists, Orthodontists, Endodontists, Prosthodontists, Cosmetic Dentists, Dental Assistants and Dental Technicians – all experienced the high level of the scientific programme while meeting the top industrial players in this field during the two day event in Dubai, UAE.
Dental Technicians Parallel Session
Over 100 Dental Technicians from in and out of the region were educated at the innovative event providing the much needed extra attention to the importance of the Dental Technician as a vital part in every Dental Team.
High Profile Networking Opportunities
The 8th CAD/CAM & Digital Dentistry International Conference offered the opportunity for it’s delegates to make new contacts and tighten existing relationships whilst exchanging ideas and knowledge on the latest trends and developments on Digital Dentistry. As every year two innovative events “Breakfast with the sponsors” and “Meet the sponsor” during the conference give the opportunities to the delegates to network with the industry and see the latest technology and equipment.
Gala Dinner Awards 2012
On the evening of 2nd May, Centre for Advanced Professional Practices, together with Emirates Dental Society, gathered the Dental elite from the Middle East to present the winners of the ‘I Love My Dentist Awards 2012’ – voted by their patients all over the world – and the ‘Aesthetic Dentistry MENA Awards 2012’. The Gala Dinner, sponsored by Crest & Oral B was highly anticipated and welcomed various VIP guests from the regions’ Ministries of Health, Dental Associations and Societies as well as the brilliant Dentists nominated for the awards.
Singapore hosts 2nd Edition Asia-Pacific, CAD/CAM Digital Dentistry
The 2nd Asia-Pacific, CAD/CAM Digital Dentistry International Conference will take place on 04-05 October 2013 at the astonishing Marina Bay Sands Hotel in Singapore. The Scientific Program includes various Stars in Digital Dentistry such as Dr. Andreas Bindl, Switserland; Dr. Lutz Ritter, Germany; Dr. Eduardo Mahn, Chile; Joachim Meier, MDT, Germany; Prof. Bernd van der Heyd, MDT, Germany; Wener Gotsch, MDT, Germany; Simon Docker, UK; Morten Ryde, Denmark; Dr. Kurt Darwis, Germany; Baris Cakir, Germany; Ike Intoratat; Rik Jacobs, The Netherlands and Ralph Oppacher, Germany. The event is organized by CAPP Asia and proudly supported by the Singapore Dental Association.
embedImagecenter("Imagecenter_1_779",779, "large");
NEW YORK, U.S.: Everyday dentistry is becoming simple, guided, esthetic and more and more digital. Within the esthetic zone in particular, depending on the ...
Dr. Gary Hack is an associate professor at the University of Maryland School of Dentistry, where he teaches in the Department of Advanced Oral Sciences and ...
CAD/CAM restorations made chairside with CEREC are among the most intensively studied restorations in dentistry. Numerous studies show that the clinical ...
SAWANGI, India: One thing is certain: technology is always changing. Whether a dental clinician is experienced in CAD/CAM or is a novice in digital ...
THESSALONIKI, Greece: As digital workflows become increasingly prevalent in restorative dentistry, the accuracy of intra-oral scanners in capturing complex ...
HELSINKI, Finland: Planmeca is proud to introduce a completely new software module for Planmeca Romexis, which makes working with digital impressions easier...
DARMSTADT, Germany: Exocad, an Align Technology company and a leading dental CAD/CAM software provider, has recently announced that Insights 2022, the third...
A graduate of Paris Descartes University (now the University of Paris), Dr Léon Pariente currently runs a private practice in the French capital that ...
No-preparation ultrathin veneer is one of the most minimally invasive restorations. Its thickness ranges from 0.3 to 0.5 mm. In the right circumstances ...
CAD/CAM technology and materials are currently used in a number of clinical applications, including the fabrication of indirect restorations. CAD/CAM gives ...
The concept of digital dentistry is one that started out small and has progressively increased in momentum until its boundaries appear to have become ...
Live webinar
Thu. 2 April 2026
12:00 pm EST (New York)
Live webinar
Wed. 8 April 2026
1:00 pm EST (New York)
Live webinar
Thu. 9 April 2026
1:00 pm EST (New York)
Live webinar
Thu. 9 April 2026
2:00 pm EST (New York)
Prof. Moritz Kebschull, Cat Edney
Live webinar
Fri. 10 April 2026
10:00 am EST (New York)
Live webinar
Fri. 10 April 2026
11:00 am EST (New York)
Dr. med. dent. Henrik-Christian Carl Hollay
Live webinar
Fri. 10 April 2026
12:00 pm EST (New York)
Prof. Dr. Ali Murat Kökat
To post a reply please login or register