Dental News - Single-tooth restoration using an all-ceramic implant solution

Search Dental Tribune

A two-piece ceramic implant was inserted. (Image: Dr Thomas Mehnert)

Thu. 12. November 2020


The latest generation of two-piece ceramic implants (zirconia) is considered an alternative treatment option to titanium implants owing to their excellent biological and material properties.[1–11] Their handling and workflow now meet the requirements of modern implantology.[12] In the following, a clinical case is described to demonstrate the use of a two-piece ceramic implant.

Clinical case

A 40-year-old female patient presented to our dental sur­gery with an irreparable tooth #21 (Fig. 1). The periapical radiograph revealed an approximately 7 mm periapical translucency with widening of the periodontal ligament in the upper third of the root (Fig. 2). Owing to the clinical conditions (high smile line and good oral hygiene), we de­cided to use a two-piece ceramic implant, ZERAMEX XT (Dentalpoint).

Surgical phase

After extraction of tooth #21, the apical granulation tissue was excochleated through a semilunar incision (Fig. 3). A two-stage procedure was performed to prevent failure of osseointegration of the ceramic implant and to preserve the soft-tissue structures (papillae and attached gingiva). A claspless prosthesis made from Valplast (Valplast In­ternational) served as a temporary restoration. The im­plant site in region #21 was uncovered after five months (Fig. 4). A two-piece ceramic implant (diameter: 4.2 mm; length: 12.0 mm) was then inserted (Figs. 5a & b). The guidelines for implant placement in the aesthetic zone and the drilling procedure specified by the manufacturer were observed.13, 14 Both vertical and transverse insertion depth are decisive for prosthetic success. The implant can be placed between 1.6 mm and 0.6 mm supracre­stally because of a special thermal etching procedure in the collar region; the insertion depth is determined by the gingival height and the existing bone of the adjacent teeth. The implant positioning should be approximately 2–3 mm subgingivally because the abutments are added 1 mm above implant shoulder level. Transversal bone augmentation was performed with a mixture of autoge­nous bone chips (retrieved from the retromolar mandi­ble), xenograft (Geistlich Bio-Oss, Geistlich Biomaterials) and guided bone regeneration (Jason membrane, botiss biomaterials; Figs. 6a & b). The exposure was performed after four months using a PEEK gingiva former (Fig. 7).

Prosthetic phase

A provisional crown made of GRADIA (GC), a microce­ramic composite, was fabricated to achieve optimum con­touring of the marginal gingiva in the highly aesthetic zone. A PEEK abutment (ZERAMEX Provisional RB; 180-day maximum period of wear), with a screw (maximum torque of 15 Ncm), acted as the base for the long-term tempo­rary restoration (Figs. 8a & b). After eight weeks and ad­justing the long-term temporary restoration in the basal area twice to optimise the emergence profile, the defin­itive zirconia crown (Ceramill substructure, Amann Girr­bach; Creation veneer) was fixed to the customised abut­ment made of alumina-toughened zirconia (Figs. 9 & 10). After exact positioning (checked by probing or by taking a radiograph) the abutment is firmly fixed by utilising the VICARBO screw which is part of the ZERAMEX system. This unique screw made of carbon fibre-reinforced high-performance polymer is tightened to a torque of 25 Ncm. The final result is shown in Figure 11. The examinations after six and 12 months found no irritation of the soft tis­sue, and the BOI test was negative. The pink aesthetic score according to Fürhauser was 12 out of a maximum of 14 points (Figs. 12a & b).15 The process of peri-implant bone remodelling was of particular interest. Examinations were performed with periapical radiographs (right angle technique) and DBSWIN software (Dürr Dental).

Bone resorption was detected six months after exposure (mesial bone: 0.6 mm; distal bone: 0.4 mm), and a gain of bone was observed 12 months after exposure (mesial bone: 0.0 mm; distal bone: 0.3 mm; Figs. 13a–c). In ac­cordance with the findings in the relevant literature, bone resorption in our patient was the greatest in the first six months.16 However, the literature findings are in reference to one-piece ceramic implants, in contrast to the two-piece implant system used in this case. This phenomenon of bone resorption is a relatively rare occurrence in im­plantology and should be confirmed by evidence-based long-term studies before a definitive conclusion can be drawn. Evaluations are in progress.


Ceramic implants are a viable alternative to titanium im­plants. Having experienced the advantages of zirconia ce­ramics yourself, you will appreciate them and will never look back. Besides providing the option of metal-free res­torations, they offer a practical addition to the existing range of treatments for many risk groups, taking into account the respective in­dications. I would recommend user training courses for this relatively new, but somewhat different, material. This is a requirement that is increasingly ad­dressed in the literature.12, 17

 Acknowledgement: The author would like to thank den­tist Frank van Doorn (Meckenheim in Germany) and master dental technician Jürgen Hopp (Mund Zauber Zahntechnik in Meckenheim) for their kind support in the field of prosthetics.

Editorial note: A list of references is available from the publisher. This article was published in ceramic implants–international magazine of ceramic implant technology Vol. 4, Issue 2/2020.

To post a reply please login or register